58
EpsonNet WinAssist Configuration Utility
AppleTalk
To use the printer in the AppleTalk environment, configure the
Internal Print Server on this screen.
Note:
To make AppleTalk settings with EpsonNet WinAssist, the following
conditions must be maintained;
❏ The Internal Print Server has a valid IP address other than the
default IP address (192.168.192.168).
❏ You have logged in to the NetWare server or the NDS context with
supervisor privileges.
Items Explanations
use NetBEUI Select this box when using NetBEUI. This check box is
dimmed when using the printer only in the NetBEUI
environment.
NetBIOS name Enter the printer's NetBIOS name (up to 15 characters). Be
sure to give a unique name that will not cause conflicts with
any other device on the network.
Workgroup
name
Enter the workgroup name or domain name used for the
Windows network environment (up to 15 characters).
Device name Enter the printer’s device name (up to 12 characters). Do not
use LPT1, LPT2, LPT3, or COM.
To Next Page
Loading...
