62
EpsonNet WinAssist Configuration Utility
SNMP
In the SNMP menu, you can set SNMP information.
Items Explanations
Read Only The word “public” is always displayed.
Read/Write Enter the Read/Write community name (up to 32
characters).
enable IP Trap 1 or/and 2 Enable or Disable the IP trap 1 or/and 2.
Address Enter the IP address of the server to which the
trap is transmitted.
Community Enter the community name (up to 32 characters).
enable IPX Trap 1 or/and 2 Enable or Disable the IPX trap 1 or/and 2.
To Next Page
Loading...
