Epson AcuLaser C8600 - Setting up for HP-UX 9.05 or Later

142
Settings for UNIX
Setting up for HP-UX 9.05 or later
In the following steps, substitute the name that your printer will
be known by for HOSTNAME, and the name by which you want
yourprintertobeknownforRprinter.
1. Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2. Terminate the printer service.
For example:
lpshut
3. Create a printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel
-ormHOSTNAME -orpaux
4. Restart the print service.
For example:
lpshed
5. Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
6. To print, use the lp command.
For example:
lp -DRPrinter Print-File-Name