74
EpsonNet MacAssist Configuration Utility
Note:
❏ The password is used for EpsonNet WinAssist, MacAssist, and
WebAssist.
❏ Since the new password takes effect after the data is sent to the
Internal Print Server, enter the old password immediately after
changing the password.
❏ If you forget your password, you need to initialize the Internal
Print Server. See “Initializing Your Printer” on page 13 for
instructions.
Options
Timeout
In the EpsonNet MacAssist dialog box, click the Options button
to display the Timeout setting dialog box. Set the length of time
before a time-out occurs (between 3 and 99 seconds). A
communication error occurs if this time is exceeded. The default
value is 5 seconds. If you set a larger value, it takes more time to
search the network printers. Therefore, change this value only if
you prefer. Restart EpsonNet MacAssist for the settings to take
effect.
To Next Page
Loading...
