Installing the Printer Driver
87
6
6
6
6
6
6
6
6
6
6
6
6
Note:
If the Add Printer wizard prompts you to select either Keep
existing driver or Replace existing driver, be sure to select the
Replace existing driver radio button.
8. Click
Finish
and follow the on-screen instructions to complete
the setup.
When you print using Microsoft Network Shared printing in
theWindows 2000/NT/XP environment, see“Using theNET
USE command” on page 87 for more details.
Using the NET USE command
If you are running Windows 2000/NT/XP and using NetBIOS to
connect to the printer, we recommend that you use the NET USE
command, as follows:
1. Click
Start
,click
Control Panel
,click
Network and Internet
Connections
,andthenselect
Network Connections
.
2. Under
LAN or High-Speed Internet
,clickthe
Local Area
Connection
icon.
3. Under
Network Tasks
,click
Change settings of this
connection
.
4. Check that
Client for Microsoft Networks
is installed. If it is not
installed, click
Install
to install it.
5. Run the command prompt and enter the following command.
NET USE
printer port
:\\
NetBIOS name of Internal Print
Server
\
Device name of Internal Print Server
To Next Page
Loading...
