Epson AcuLaser C8600 - Reformatting the Hard Disk Drive

Troubleshooting
221
13
13
13
13
13
13
13
13
13
13
13
13
Reformatting the Hard Disk Drive
To reformat the Hard Disk Drive, follow the instructions below.
1. Make sure the printer is turned off.
2. Hold down the
Down
buttonwhileyouturnontheprinter.
3. When you see the message
Support Mode
on the LCD panel,
select
HDD Format
in the support menu.
Note:
❏
After reformatting the Hard Disk Drive, the printer will
automatically reboot.
❏
When you want to erase only the fonts installed from the optional
Adobe PostScript 3 (PS3), follow steps 1 through 3 above. Select
PS3 HDD Init when the optional Adobe PostScript 3 ROM is
installed.
❏
When installing a Hard Disk Drive from a different printer,
reformatitwiththisfunction.
The printer is not in the same
segment as the computer
where you installed
EpsonNet WinAssist.
To search for Internal Print Servers in
other segments, use the
Search Options
of EpsonNet WinAssist.
You have not logged in to the
target NetWare server with
supervisor privileges.
From the computer in which EpsonNet
WinAssist is installed, log in to the target
NetWare server with supervisor
privileges.