Getting Started
7
1
1
1
1
1
1
1
1
1
1
1
1
Chapter 1
Getting Started
Overview
This section describes the general procedure on how to use a
printer on a network.
1. Set up your printer
Set paper and toner in the printer, as necessary. See the
Reference
Guide
.
2. Select a printing method
Select a printing method appropriate for your network
environment and operating system. See “Selecting a Printing
Method” on page 8 for more details.
3. Connect your printer to the network
Connect your printer to the hub with an Ethernet cable. See
“Connecting Your Printer to the Network” on page 18 for more
details.
4. Check the network settings of your computer
Check the network settings such as IP address and subnet mask
of your computer. Install network protocols if necessary. See
“About Installing Components on Your Computer” on page 27
for more details.
To Next Page
Loading...
