8
Getting Started
5. Configure the Internal Print Server
Use EpsonNet WinAssist or MacAssist to configure the Internal
Print Server. Set its IP address, subnet mask, default gateway,
printer name, etc. If you print via a NetWare server, set up the
printing environment on the server first. See “About EpsonNet
WinAssist” on page 41 or “About EpsonNet MacAssist” on page
69 for more details.
6. Install the printer driver
Install the printer driver from the CD-ROM that comes with the
printer. See “About Installing the Printer Driver” on page 77 for
more details.
Selecting a Printing Method
If necessary, use this section to help you select a printing method.
Printing from Windows
Check if there is a Windows XP/2000/NT print server on your
network, and then use the suggestions below.
Note:
Only the recommended printing methods are introduced here. See
“Features of the Printing Methods” on page 9 for more methods.
If no Windows XP/2000/NT print server exist
Use a printing method appropriate to your operating system, as
follows:
❏ For Windows Me/98/95
We recommend TCP/IP printing via EpsonNet Direct Print.
See “Easy Setup Procedures” on page 15.
To Next Page
Loading...
