102
Installing the Printer Driver
6. Enter the IP address of the Internal Print Server in the LPD
server box. Enter the printer name set in step 2 in the LPD
printer box.
7. Close the Printer icon to exit printer configuration.
NetBEUI printing
1. Be sure that IBM OS/2NetBIOSis installed on your computer.
2. To create a printer, double-click the target printericon to open
the Properties dialog box. Then click the Output Port tab.
3. Select the port.
4. Connect to the printer from the command line.
Example: Connect the printer to LPT1.
net use LPT1: \\NetBIOS name of Internal Print Server\ Device
name of Internal Print Server
To Next Page
Loading...
