30
Installing Components on Your Computer
For printing via NetWare server:
Select Protocol and then click Add.SelectMicrosoft from the
Manufacturers list and IPX/SPX-compatible Protocols from
the Network Protocols list. Then click OK.
Select Client and then click Add. Select Microsoft from the
Manufacturers list and Client for NetWare Networks from the
Network Clients list. Then click OK.
4. For LPR, Internet, Microsoft Network Shared printing:
Double-click TCP/IP on the Configuration menu to open the
TCP/IP Properties dialog box. Set the IP address, the subnet
mask,etc.andthenclickOK.
5. Restart the computer.
The necessary components are now installed. Go to “About
EpsonNet WinAssist” on page 41.
Windows XP
For Windows XP, use the following procedure to install the
necessary components.
Note:
❏ The Windows XP CD-ROM may be required during the
installation.
❏ When using TCP/IP or IPP for printing, you need to set the IP
address, the subnet mask, and the default gateway of the computer.
1. Click Startand then Control Panel.ClickNetwork andInternet
Connections,andthenselectNetwork Connections.
2. Under LAN or High-Speed Internet,clicktheLocal Area
Connection icon.
To Next Page
Loading...
