106
Settings for NetWare Server
Features of the modes are described below.
Print Server mode (NDS/Bindery Print Server):
❏ High-speed printing with direct printing
❏ Uses the NetWare user account
❏ Ability to connect up to 8 file servers simultaneously
❏ Ability to register up to 32 print queues
Remote Printer mode:
❏ A NetWare user account is not required.
❏ A print server is necessary to control the remote printer.
❏ Ability to attach up to 16 printers for NetWare 3.x, and up
to 255 for NetWare 4.x or later.
Note:
When you turn on the printer, the user account is temporarily
accessed in Remote Printer mode. If there is no room in the user
account, turn on the printer before connecting the client to the
network.
Standby mode (factory default mode):
The Standby mode is the default mode. With this mode, all
NetWarerelated functions stop.Use Standby modewhen you
are not using the Internal Print Server in a NetWare
environment.
To Next Page
Loading...
