22
Easy Setup for Windows Me/98/95
9. Select Auto or Manual.IfyouselectAuto, DHCP becomes
available and assigns an IP address automatically. If you
select Manual, you can enter the IP address manually. Click
Next.
Note:
❏ We recommend that you select Manual and enter the IP
address. If you select Auto, every time you turn on the printer
the IP address of the Internal Print Server changes so that you
need to change the printer port setting accordingly.
❏ To use the DHCP server, make sure it is installed on your
computerandconfiguredcorrectly. See your operatingsystem’s
online help for detailed instructions.
10. Check your settings and click Send.
If you have set a password for the Internal Print Server, the
Password dialog box appears. Enter your password (up to 20
characters) and click OK to save your settings. Follow the
on-screen instructions.
To Next Page
Loading...
