Installing Components on Your Computer
33
3
3
3
3
3
3
3
3
3
3
3
3
❏
When using TCP/IP or IPP for printing, you need to set the IP
address, the subnet mask, and the default gateway of the computer.
1. Click
Start
, point to
Settings
, and then select
Network and
Dial-up Connections
. The Network and Dial-up Connections
screen appears.
2. Right-click the desired network connection and then select
Properties
.
3. Check if the following necessary components are in the list. If
theyare already installed,goto “About EpsonNetWinAssist”
on page 41.
To Next Page
Loading...
