66
EpsonNet WinAssist Configuration Utility
Search Options-IPX
When you manage the Internal Print Server with IPX (NetWare),
and when you want to configure the Internal Print Server outside
of the local network, set the network address of the Internal Print
Server. Restart EpsonNet WinAssist or select Refresh from the
View menu for the settings to take effect.
Note:
❏ To use this option, you need to log in to the NetWare server as a
supervisor.
Text box Enter the network address (valid range 0 to 255) of the
Internal Print Server you want to find as described
below:
Class A: value.255.255.255
Class B: value. value.255.255
Class C: value. value. value.255
List box Displays network addresses that have been
registered.
Add button Registers network addresses (up to 20 addresses). Do
not add the network address if it is in the same
segment.
Delete button Deletes a network address from the List box.
OK Saves the settings.
Cancel Cancels any changes.
To Next Page
Loading...
