Epson All in One Printer User Manual

Menu Settings and Description
PCL Menu Font Source Select the default font source.
Font
Number
Select the default font number for the
default font source. The available
number depends on the settings you
made.
Pitch Set the default font pitch if the font is
scalable and of fixed-pitch. You can
select from 0.44 to 99.99 cpi (characters
per inch), in 0.01-cpi increments. This
item may not appear depending on the
Font Source or Font Number settings.
Height Set the default font height if the font is
scalable and proportional. You can
select from 4.00 to 999.75 points, in
0.25-point increments.
This item may not appear depending
on the Font Source or Font Number
settings.
Symbol Set Set the default symbol set. If the font
you selected in Font Source and Font
Number is not available in the new
Symbol Set setting, the Font Source and
the Font Number settings are
automatically replaced with the default
value, IBM-US.
Form Set the number of lines for the selected
paper size and orientation. This also
causes a line spacing (VMI) change, and
the new VMI value is stored in the
printer. This means that later changes in
the Page Size or Orientation settings
cause changes in the Form value, based
on the stored VMI.
CR Function Set for using particular operating
systems, such as UNIX.
LF Function
Paper
Source
Assign
Set the assignment for the paper source
select command. When 4 is selected,
the commands are set as compatible
with the HP LaserJet 4. When 4K is
selected, the commands are set as
compatible with the HP LaserJet 4000,
5000, and 8000. When 5S is selected,
the commands are set as compatible
with the HP LaserJet 5S.
User’s Guide
Menu List of Control Panel
109

Epson All in One Printer Specifications

General

Brand	Epson
Model	All in One Printer
Category	All in One Printer
Language	English