Maintaining Your Product and Software
Installing Option
Paper Cassette Unit
Installing the paper cassette unit
Follow the steps below to install the paper cassette unit.
Note for WF-4630 Series / WF-5620 Series / WF-5690 Series :
This unit is option.
& “Option” on page 191
A
Turn the product off and unplug the power cord and all the interface cables.
!
Caution:
Make sure to unplug the power cord from the product to prevent getting an electric shock.
B
Carefully remove the paper cassette unit from its carton and place it where you intend to set up the product.
Note:
❏ Remove the protective materials from the unit.
❏ Keep all protective materials in case you want to ship the optional paper cassette unit in the future.
C
Align the corners of the product and the unit, then lower the product gently onto the unit so that the connector
and two pins on the top of the unit fit into the terminal and the holes on the bottom of the product respectively.
User’s Guide
Maintaining Your Product and Software
125
To Next Page
Loading...
Need help?
General
