Menu Settings and Description
Restore Default
Settings
Resets the selected settings to their defaults.
*1This function is only supported by the WF-5690 Series.
*2This function is only supported by the WF-5620 Series and WF-5690 Series.
Contacts
& “Making Contact List Settings” on page 95
Presets
You can save frequently used copy, scan, and fax settings as a preset. Destination information selected from the contact
list, such as email addresses, network folders, and fax numbers, is also included in the preset.
Follow the steps below to create a preset.
Press Presets on the Home screen, select Add New, and then select a function. The top screen of the selected function is
displayed. Make your preferred settings, and then press Save. Enter a name to identify the preset, and then press
Save.
Note:
You can also create presets in each function mode by pressing Presets on the top screen of the selected function.
To call up the preset, press Presets on the Home screen, and then select the preset you want to use from the preset
list.
Status Menu
& “Status Menu” on page 22
User’s Guide
Menu List of Control Panel
111
To Next Page
Loading...
Need help?
General
