❏ Open the ADF cover and use a soft, dry, clean cloth to clean the roller and the interior of the ADF.
Cleaning the interior of the product
If your printouts are stained with ink, follow the steps below to clean the roller inside the product.
!
Caution:
Be careful not to touch the parts inside the product.
c
Important:
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the product with lubricants.
❏ Unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is
needed.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Load several sheets of A4-size plain paper in paper cassette 1.
& “Loading Paper into the Paper Cassette” on page 28
Note:
If you are having problems feeding the paper and have a cleaning sheet that came with your Epson genuine paper, load the
cleaning sheet in the rear paper feed slot instead of the plain paper.
C
Enter Setup mode from the Home menu.
D
Select Maintenance, Paper Guide Cleaning, and then follow the instructions on the control panel.
Note:
If your printouts are still stained, load A4-size plain paper in another paper source, and then try steps 3 and 4 again.
User’s Guide
Maintaining Your Product and Software
134
To Next Page
Loading...
Need help?
General
