D
Shake the ink cartridge for 5 seconds 15 times horizontally in approximately 10 cm movements as shown in the
following illustration.
E
Place the ink cartridge into the cartridge holder. Push the cartridge until it clicks into place.
Note:
If Check is displayed on the product's control panel, press it to check if the cartridges are installed correctly.
F
Close the front cover.
Note:
Do not turn off the product while the power light is flashing.
Ink cartridge replacement is complete. The printer will return to its previous status.
User’s Guide
Replacing Ink Cartridges
124
To Next Page
Loading...
Need help?
General
