Epson DS-790WN

4.
Make the job settings on the Job Settings window.
❏ Job Name: Enter the name of the job you want to register.
❏ Scan: Make scan settings such as the size of the originals or the resolution.
❏ Output: Set the saving destination, the saving format, the naming rules of the
les,
and so on.
❏ Destination: Select the destination of the scanned images. You can send them by email or forward them to
an FTP server or Web server.
5.
Click OK to return to the Job List window.
e created job is registered in the Job List.
6.
Click OK to return to the main window.
Assigning a Job to the Control Panel (Mac OS)
Explains how to assign a job to the scanner’s control panel in Document Capture. See the Document Capture help
for details on the features.
1.
Start Document Capture.
2.
Click the
icon on the main window.
e Job List window is displayed.
3.
Click the
icon and select Event Settings.
4.
Select the job you want to run on the control panel from the pull-down menu.
5.
Click OK to return to the Job List window.
e job is assigned to the scanner’s control panel.
6.
Click OK to return to the main window.
Related Information
& “Scanning Originals to a Computer” on page 71
Scanning in Automatic Feeding Mode
InAutomatic Feeding Mode, scanning starts automatically when originals are loaded into the ADF. is is useful
when you want to scan originals one by one, or add originals to the current scanning process.
When you are using Document Capture Pro, you can also use Automatic Feeding Mode.
1.
Start Epson Scan 2.
Note:
When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the Detailed Settings
button on the scan settings screen.
Scanning > Scanning in Automatic Feeding Mode
112