Epson DS-790WN

3.
Select the menu you want to use to register a preset.
4.
Set each item, and then select
.
Note:
When you select Scan to Computer, select the computer on which Document Capture Pro is installed, and then select a
registered job. is is available only for computers connected over a network.
5.
Make the preset settings.
❏ Name: Set the name.
❏ Set Icon: Set the image and color of the icon to display.
❏ Quick Send Setting: Immediately starts scanning without conrmation when the preset is selected.
When you are using Document Capture Pro Server, even if you set the soware to conrm a job's contents
before scanning, the Quick Send Setting on the scanner's preset takes priority over the
soware.
❏ Contents: Check scan settings.
6.
Select OK.
Related Information
& “Setting a Job” on page 111
Menu Options of Presets
You can change the settings of a preset by selecting in each preset.
Customizing the Control Panel Display > Registering Presets > Menu Options of Presets
149