Epson DS-790WN

Automatic Feeding Mode:
Set Automatic Feeding Mode. is feature allows you to continue scanning automatically aer the
originals are scanned. is feature is useful when scanning dierent sizes or types of originals one by
one.
Adjust the edge guides of the scanner before placing each original.
❏ On (Full-Auto): Start scanning when an original is set while the continuation conrmation
message is displayed.
❏ On (Semi-Auto): Start scanning when the Start Scanning button is pressed while the continuation
conrmation message is displayed.
Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor. You can specify the detection
range.
❏ Length: Detect a double feed by the length. When the length of the second original scanned is
dierent from the rst, this is identied as a double feed. You can specify the dierence in length
for detection.
Subject:
Enter a subject for the email in alphanumeric characters and symbols.
Attached File Max Size:
Select the maximum le size that can be attached to the email.
File Name:
❏ Filename
Prex
:
Enter a
prex
for the name of the images in alphanumeric characters and symbols.
❏ Add Date:
Add the date to the le name.
❏ Add Time:
Add the time to the le name.
Clear All Settings
Resets the scan settings to their defaults.
Using Scan to My Folder
You can save scanned data to a personal storage folder. If you do not know your target folder, contact your system
administrator.
Note:
You need to make settings in advance to use this feature. See the Administrator's Guide for details.
1.
Log in.
e menu that is allowed to you is displayed.
Authentication Scanning > Using Scan to My Folder
166