1.
Open the scanner list on the computer.
❏ Windows 10
Click on the start button, and then select Windows System > Control Panel > View devices and printers
in Hardware and Sound.
❏ Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
2.
Right-click on your scanner and select Properties.
3.
Select the Web Ser vice tab and click the URL.
Since the scanner uses a self-signed
certicate
when accessing HTTPS, a warning is displayed on the browser
when you start Web Cong; this does not indicate a problem and can be safely ignored.
Note:
❏ e following provides the initial values for the Web Cong administrator information.
·User name: none (blank)
·Password: serial number of the scanner
To nd the serial number, check the label attached to the rear of the scanner.
❏ If Log out is displayed at the top-right of the screen, you have already logged-on as an administrator.
Application for Setting up the Device on a Network (EpsonNet
Cong)
EpsonNet Cong is an application that allows you to set the network interface addresses and protocols. See the
operations guide for EpsonNet
Cong
or the application's help for more details.
Starting on Windows
❏ Windows 10/Windows Server 2019/Windows Server 2016
Click the start button, and then select EpsonNet > EpsonNet Cong.
❏ Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008/Windows Server 2003 R2/
Windows Server 2003
Click the start button, and select All Programs or Programs > EpsonNet > EpsonNet
Cong
SE > EpsonNet
Cong.
Starting on Mac OS
Go > Applications > Epson Soware > EpsonNet > EpsonNet Cong SE > EpsonNet Cong.
Scanner Basics
>
Information on Applications
>
Application for Setting up the Device on a Network (EpsonNet Con
…
30