Epson DS-790WN

Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor. You can specify the detection
range.
❏ Length: Detect a double feed by the length. When the length of the second original scanned is
dierent from the rst, this is identied as a double feed. You can specify the dierence in length
for detection.
File Name:
❏ Filename Prex:
Enter a prex for the name of the images in alphanumeric characters and symbols.
❏ Add Date:
Add the date to the le name.
❏ Add Time:
Add the time to the
le
name.
Clear All Settings
Resets the scan settings to their defaults.
Scanning Originals to an Email
You can send the scanned image by email directly from the scanner. Before scanning, you need to
congure
the
email server.
You can specify the email address by entering directly, but it may be easier if you register the email address in the
contacts list rst.
Note:
❏ Make sure the scanner’s Date/Time and Time Dierence settings are correct. Select Settings > Basic Settings > Date/
Time Settings on the control panel.
❏ You can check destination before scanning. Select Settings > Scanner Settings, and then enable the Conrm Recipient.
1.
Place the originals.
2.
Select Email on the home screen of the scanner’s control panel.
3.
Specify the destination.
Scanning > Scanning Using the Scanner's Control Panel > Scanning Originals to an Email
77