Epson DS-790WN

Items Settings and Explanation
Certicate Validation The FTP server's certicate is validated when this is enabled. This is available when
FTPS is selected for Secure Connection.
To set up, you need to import the CA Certicate to the scanner.
SharePoint(WebDAV)
Secure Connection Select HTTP or HTTPS according to the le transfer protocol the server supports.
Select HTTPS to allow the scanner to communicate with security measures.
Save to Enter the server name between 1 and 253 characters in Unicode (UTF-16),
omitting "http://" or "https://".
User Name Enter a user name to access a server in 30 characters or less in Unicode (UTF-16).
However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not specify
this, leave it blank.
Password Enter a password to access to a server between 0 and 20 characters in Unicode
(UTF-16). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do
not specify this, leave it blank.
Certicate Validation The server's certicate is validated when this is enabled. This is available when
HTTPS is selected for Secure Connection.
To set up, you need to import the CA Certicate to the scanner.
Proxy Server Select whether or not to use a proxy server.
Registering Destinations as a Group Using Web
Cong
If the destination type is set to Email, you can register the destinations as a group.
1.
Access Web Cong and select the Scan tab > Contacts.
2.
Select the number that you want to register, and then click Edit.
3.
Select a group from Type.
4.
Click Select for Contact(s) for Group.
e available destinations are displayed.
5.
Select the destination that you want to register to the group, and then click Select.
6.
Enter a Name and Index Word.
7.
Select whether or not you assign the registered group to the frequently used group.
Note:
Destinations can be registered to multiple groups.
8.
Click Apply.
Required Settings for Scanning > Making Contacts Available > Registering Destinations as a Group Using …
138