Epson DS-790WN

c
Important:
❏ Do not turn
o
the computer or the scanner while updating.
Note:
When the scanner can connect to the Internet, you can update the rmware from Web Cong. Select the Device
Management tab > Firmware Update, check the displayed message, and then click Start.
1.
Make sure that the scanner and the computer are connected, and the computer is connected to the internet.
2.
Start EPSON Soware Updater, and update the applications or the rmware.
Note:
Windows Server operating systems are not supported.
❏ Windows 10
Click the start button, and then select Epson Soware > EPSON Soware Updater.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7
Click the start button, and then select All Programs or Programs > Epson Soware > EPSON Soware
Updater.
❏ Mac OS
Select Finder > Go > Applications > Epson Soware > EPSON Soware Updater.
Note:
If you cannot nd the application you want to update in the list, you cannot update using the EPSON Soware Updater.
Check for the latest versions of the applications on your local Epson website.
http://www.epson.com
Updating the Scanner's Firmware using the Control Panel
If the scanner can be connected to the Internet, you can update the scanner's rmware using the control panel. You
can also set the scanner to regularly check for rmware updates and notify you if any are available.
1.
Select Settings on the home screen.
2.
Select System Administration > Firmware Update > Update.
Note:
Select Notication > On to set the scanner to regularly check for available rmware updates.
3.
Check the message displayed on the screen and start searching for available updates.
Maintenance > Updating Applications and Firmware > Updating the Scanner's Firmware using the Control Panel
194