Registering Presets
You can register frequently used scanning setting as Presets. You can register up to 48 presets.
Note:
❏ You can register the current settings by selecting
on the start scanning screen.
❏ You can also register Presets in Web Cong.
Select the Scan tab > Presets.
❏ If you select Scan to Computer when registering, you can register the job created in Document Capture Pro as Presets.
is is available only for computers connected over a network. Register the job in Document Capture Pro in advance.
❏ If the Lock Setting on the control panel is enabled, only the administrator can register Presets.
1.
Select Presets on the home screen on the scanner's control panel.
2.
Select
.
Customizing the Control Panel Display
>
Registering Presets
148
To Next Page
Loading...
