Manufacturer: Seiko Epson Corporation
Type: J26H005
is
product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modication of the product. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject
to licensing.
is equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. is equipment should be installed and operated so that the radiator is kept at least
7.9 inches (20 cm) or more away from a person’s body (excluding extremities: hands, wrists, feet and ankles).
AC adapter (A461H)
EMC FCC Part 15 Subpart B Class B
CAN ICES-3 (B)/NMB-3 (B)
ZICTA Type Approval for Users in Zambia
See the following website to check the information for ZICTA Type Approval.
https://support.epson.net/zicta/
Standards and Approvals
>
ZICTA Type Approval for Users in Zambia
244
To Next Page
Loading...
