Epson DS-790WN

Clear All Settings
Resets the scan settings to their defaults.
Scanning Using WSD
Note:
❏ is feature is only available for computers running Windows 10/Windows 8.1/Windows 8.
❏ If you are using Windows 7, you need to setup your computer in advance using this feature.
1.
Place the originals.
2.
Select WSD on the home screen of the scanner’s control panel.
3.
Select a computer.
4.
Tap
x.
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following conditions must be met to set up a WSD port.
❏ e scanner and the computer are connected to the network.
❏
e
scanner driver is installed on the computer.
1.
Turn the scanner on .
2.
Click the start button on the computer, and then click Network.
3.
Right-click the scanner, and then click Install.
Click Continue when the User Account Control screen is displayed.
Scanning > Scanning Using the Scanner's Control Panel > Scanning Using WSD
89