Epson DS-790WN

❏ Noise reduction level:
You can adjust the level of noise reduction (unnecessary black dots).
e higher the level, the more noise reduction is applied.
Remove Shadow:
Remove the shadows of the original that appear in the scanned image.
❏ Frame:
Remove the shadows at the edge of the original.
Correct Document Skew:
Correct skew in the scanned image.
is feature may not be able to correct documents that have been over skewed.
Skip Blank Pages:
Skip blank pages when scanning if there are any in the originals.
If the result is not what you expected, adjust detection level.
Note:
❏ Some pages may be incorrectly skipped as blank pages.
❏ is feature is not available when scanning double-sided originals that are stitched.
Automatic Feeding Mode:
Set Automatic Feeding Mode. is feature allows you to continue scanning automatically aer the
originals are scanned. is feature is useful when scanning dierent sizes or types of originals one by
one.
Adjust the edge guides of the scanner before placing each original.
❏ On (Full-Auto): Start scanning when an original is set while the continuation
conrmation
message is displayed.
❏ On (Semi-Auto): Start scanning when the Start Scanning button is pressed while the continuation
conrmation message is displayed.
Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor. You can specify the detection
range.
❏ Length: Detect a double feed by the length. When the length of the second original scanned is
dierent from the rst, this is identied as a double feed. You can specify the dierence in length
for detection.
File Name:
❏ Filename Prex:
Enter a prex for the name of the images in alphanumeric characters and symbols.
❏ Add Date:
Add the date to the le name.
❏ Add Time:
Add the time to the le name.
Scanning > Scanning Using the Scanner's Control Panel > Scanning to a USB Drive
88