Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used,
Wi-Fi connections are disabled.
Network Status
Displays the current network settings for the following items.
❏ Wired LAN/Wi-Fi Status
❏ Wi-Fi Direct Status
❏ Email Server Status
Advanced
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ Email Server
❏ Server Settings
❏ Connection Check
❏ IPv6 Address
❏ Link Speed & Duplex
❏ Redirect HTTP to HTTPS
❏ Disable IPsec/IP Filtering
❏ Disable IEEE802.1X
Web Service Settings
Epson Connect Services:
Displays whether the scanner is registered and connected to Epson Connect.
You can register to the service by selecting Register and follow the instructions.
When you have registered, you can change the following settings.
❏ Suspend/Resume
❏ Unregister
For details, see the following web site.
https://www.epsonconnect.com/
http://www.epsonconnect.eu (Europe only)
Menu Options for Settings
>
Web Service Settings
176
To Next Page
Loading...
