Epson DS-790WN

Importing Contacts
Import the contacts information from the le.
You can import the les saved in SYLK format or csv format or the backed-up binary le that includes the security
items.
1.
Start Epson Device Admin.
2.
Select Devices on the side bar task menu.
3.
Select the device you want to congure from the device list.
4.
Click Device Conguration on the Home tab on the ribbon menu.
When the administrator password has been set, enter the password and click OK.
5.
Click Common > Contacts.
6.
Click Browse on Import.
7.
Select the le you want to import and then click Open.
When you select the binary le, in Password enter the password you set when exporting the le.
8.
Click Import.
e conrmation screen is displayed.
9.
Click OK.
e validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
❏ Read more le
Click when you want to import multiple les.
10.
Click Import, and then click OK on the import completion screen.
Return to the device's property screen.
11.
Click Transmit.
12.
Click OK on the conrmation message.
e
settings are sent to the scanner.
13.
On the sending completion screen, click OK.
e scanner's information is updated.
Open the contacts from Web Cong or scanner's control panel, and then check that the contact is updated.
Required Settings for Scanning > Making Contacts Available > Export and Bulk Registration of Contacts U …
141