Placing Large Size Originals
1.
Extend the input tray extension. Slide out the output tray, extend the output tray extension, and then raise the
stopper.
2.
Slide the edge guides on the input tray all the way out.
3.
Place the Carrier Sheet with the illustration on the front edge facing up and place the original in the carrier
sheet by folding it in half so that the side to be scanned is facing out, with the right side at the front.
Specications and Placing of Originals
>
Placing Originals
>
Large Size Originals
55
To Next Page
Loading...
