Text Enhancement:
Make blurred letters in the original clear and sharp.
❏ Edge Enhancement:
You can enhance the text edges (the border between the text and the background).
When you increase the value, the edges of thin text become black.
Decrease the value if there is too much noise in the scanned image.
❏ reshold:
You can adjust the borderline for monochrome binary (black or white).
e black areas become larger when you increase the value, and the white areas become larger
when you decrease the value.
❏ Noise reduction level:
You can adjust the level of noise reduction (unnecessary black dots).
e
higher the level, the more noise reduction is applied.
Remove Shadow:
Remove the shadows of the original that appear in the scanned image.
❏ Frame:
Remove the shadows at the edge of the original.
Correct Document Skew:
Correct skew in the scanned image.
is feature may not be able to correct documents that have been over skewed.
Skip Blank Pages:
Skip blank pages when scanning if there are any in the originals.
If the result is not what you expected, adjust detection level.
Note:
❏ Some pages may be incorrectly skipped as blank pages.
❏ is feature is not available when scanning double-sided originals that are stitched.
Automatic Feeding Mode:
Set Automatic Feeding Mode. is feature allows you to continue scanning automatically aer the
originals are scanned. is feature is useful when scanning dierent sizes or types of originals one by
one.
Adjust the edge guides of the scanner before placing each original.
❏ On (Full-Auto): Start scanning when an original is set while the continuation conrmation
message is displayed.
❏ On (Semi-Auto): Start scanning when the Start Scanning button is pressed while the continuation
conrmation message is displayed.
Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor. You can specify the detection
range.
Scanning
>
Scanning Using the Scanner's Control Panel
>
Scanning to the Cloud
84
To Next Page
Loading...
