Setup & Operation 2. Specifications
G10 / G20 Rev.20 23
Protected-model G10/G20-***D, P
The following figure shows the additional parts and specifications for the Table Top mounting
Protected-model when compared with the Standard-model in appearance.
Normal G10/G20-***D* Manipulators do not have bellows. If necessary, select the bellows option at
shipment. The following figure is a Manipulator with bellows option.
For dimensions of the end part of G10/G20-***D* without bellows option, refer to G10/G20-***S.
For Protected-model, all the screws used for outer parts are stainless steel screws. (Excluding the
screw used for mechanical stop.)
To Next Page
Loading...
Need help?
General
