Epson LX-810 User Guide

Using the Command Summary
The following section lists and describes all the commands by
topic. If a command has no parameters, it is merely listed. If it has
parameters, they are explained. The parameters are indicated by
lowercase italicized letters, usually n. The examples below show
how the parameters are indicated.
ESC @ is a command with no parameters.
ESC U l/0 is a command that uses 1 to turn the feature on and 0
to turn it off.
ESC $ n1 n2 is a command with two parameters.
ESC D nn is a command with a variable number of parameters.
8-2
Command Summary

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)