Epson LX-810 User Guide

Character Tables
These character tables are selected by setting DIP switches l-5,
l-6, l-7, and l-8, or using the ESC t software command. For the
graphics character tables, the ESC 6 and ESC 7 software commands
let you select whether hex codes 80 to 9F are characters (ESC 6) or
control codes (ESC 7).
Italic character table
CODE 0 1 23456789ABCDEF
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
A-2
Appendix

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)