Cut-Sheet Feeder
Single sheet insertion
Your cut-sheet feeder also has a single sheet loading feature. This
feature is especially useful because it allows you to switch to a
different type or size of paper (for one sheet only) without
replacing the stack of paper in your cut-sheet feeder.
1.
Press the ON LINE button to set the printer off line.
2.
Align the single sheet to be fed with the mark on the left
paper guide, then slide the sheet into the printer path until you
feel resistance.
3. Press the LOAD/EJECT button to load the sheet.
Using the Printer Options
4-7
To Next Page
Loading...
