Epson LX-810 User Guide

Setting Up Your Application Software
Most application programs let you specify the type of printer you
are using so that the program can take full advantage of the
printer’s features. Many of these programs provide an installation
or setup section that presents a list of printers.
Choosing from a menu
Because the family of Epson printers shares a great many
commands, you can use an application program even if it does not
list your printer on its printer selection menu. If your printer is not
listed, choose from the following list. (The printers are listed in the
order of preference.)
LX-810/850
LX-800
LX-86
LX-80
FX-850
FX-86e
EX-800
FX-85
FX-80+
FX-80
If none of these printers is listed, select the first one available on
the following list: LX, FX, EX, RX, MX, Epson printer, Standard
printer, Draft printer.
To use all of the features of the printer, however, it is best to
choose a program with one of the LX printers on its menu. If your
program does not list one of these printers, contact the software
manufacturer to see if an update is available.
1-14
Setting Up the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)