Epson LX-810 User Guide

Assembling the Printer
Installing the ribbon cartridge
Before installing the ribbon cartridge, make sure that the printer is
not plugged into an electrical outlet.
1.
Raise the printer cover to the upright position. Then lift the
cover up and off.
2.
Slide the print head to the middle of the printer. Then open
the paper tension unit cover.
1-6 Setting Up the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)