Epson LX-810 User Guide

Switching Between Continuous and Single Sheets
Switching back to continuous paper
1.
2.
3.
4.
5.
6.
Make sure that the single sheet is ejected and the printer is off
line.
Slide the edge guides together so that they meet at the center
of the paper’s width.
Lower the paper guide onto the back of the printer.
Pull the paper release lever forward to the continuous paper
position.
Press the LOAD/EJECT button to feed the continuous paper to
the loading position.
Press the ON LINE button to set the printer on line so it can
accept data.
Paper Handling 2-9

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)