Epson LX-810 User Guide

Setting the DIP Switches
DIP switch settings
The tables below show the settings for each DIP switch function.
The current settings appear on your self test printout.
DIP Switch 1
characters and See Table 2
D/P Switch 2
SW Description
ON
OFF
2-1 Short tear-off
Invalid Valid
2-2 Cut-sheet feeder mode
ON OFF
2-3 Skip-over-perforation
ON OFF
2-4 Auto line feed
ON OFF
Table 1 Page length
Page length
SW1-3 SW1-4
11 inches
OFF OFF
12 inches
I
ON OFF
8.5 inches
11.7 inches
OFF ON
ON ON
3-6 Using the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)