Epson LX-810 User Guide

Unpacking the Printer
When you unpack the printer, make sure that you have all the
parts shown below and that none has been damaged.
printer
paper guide
ribbon cartridge
platen knob
power cable
Note: In some locations, the power cord is attached to the
printer.
After removing the parts, save the packaging materials in case you
ever need to transport your printer.
CAUTION: There are several different versions of the
printer designed for different electrical standards. It is not
possible to adjust the printer for use at another voltage.
The power supply type is shown on the label on the
back of the printer. If it does not show the correct
voltage for your country, contact your dealer.
1-2
Setting Up the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)