Epson LX-810 User Guide

on line
When the printer is on line, it is able to communicate with the
computer connected to it. The ON LINE button controls the printer’s
on line/off line status.
reset
To return a printer to its defaults, either by a command, an INIT
signal, or by turning the printer off and on.
top of form
The position on the paper that the printer recognizes as the first
printable line. The printer feeds the paper to this position when it
loads the paper.
unidirectional printing
Printing in one direction only. Allows more precise vertical
alignment than bidirectional printing. Often used for printing
graphics.
user-defined characters
Characters that are defined and stored in the printer by the user.
Also known as downloaded characters.
GL-4 Glossary

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)