Epson LX-810 User Guide

Using Single Sheets
Your printer can .accommodate single sheets with a width of 182
mm (7.2 inches) to 257 mm (10.1 inches).
Loading the paper
1.
Turn off the printer; then place the paper guide in the upright
position. Set the paper release lever to the single-sheet position.
2.
3.
Turn on the printer. The POWER and PAPER OUT lights come on.
Slide the left edge guide until it locks in place at the guide
mark. Next, adjust the right edge guide to match the paper
width.
2-2
Paper Handling

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)