Epson LX-810 User Guide

Commands Arranged by Topic
ASCII
Dec. Hex. Description
ESC M 77
SI 15
ESC S1 15
DC2 18
so 14
ESC S0 14
DC4 20
ESC W l/O 87
Print enhancement
ASCII Dec.
4D
0F
0F
12
0E
0E
14
57
Hex.
Select 12 cpi
Select Condensed Mode
Select Condensed Mode
Cancel Condensed Mode
Select Double-Width Mode (one line)
Select Double-Width Mode (one line)
Cancel Double-Width Mode (one line)
Turn Double-Width Mode On/Off
Description
ESC E 69 45
ESC F 70 46
ESC G 71 47
ESC H 72 48
ESC S0 83 53
ESC S1 83 53
ESC T 84 54
ESC 4 52 34
ESC 5 53 35
ESC-l/O 45 2D
Select Emphasized Mode
Cancel Emphasized Mode
Select Double-Strike Mode
Cancel Double-Strike Mode
Select Superscript Mode
Select Subscript Mode
Cancel Superscript/Subscript Mode
Select Italic Mode
Cancel Italic Mode
Turn Underline Mode On/Off
Command Summary 8-7

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)