Epson RC700 Series Original Instructions

Functions 8. Memory Port
RC700 Series Rev.3 125
8.4 Details of Data
The following data files are created by the Controller backup function.
File Name
Outline
Backup.txt Information file
for restore
File with information for Controller restore.
CurrentMnp01.PRM
Robot parameter
Saves information such as ToolSet.
CurrentStatus.txt
Save status
Saves program and I/O status.
ErrorHistory.csv
Error history
InitFileSrc.txt
Initial setting
Saves various settings of the Controller.
MCSys01.MCD
Robot setting
Saves information of connected robot.
SrcmcStat.txt Hardware
information
Saves installation information of hardware.
ProjectName.obj OBJ file Result of project build.
Prg file is not included.
GlobalPreserves.dat Global Preserve
variables
Saves values of Global Preserve variables.
MCSRAM.bin
MCSYSTEMIO.bin
MCTABLE.bin
MDATA.bin
SERVOSRAM.bin
VXDWORK.bin
Inner information
of Robot operation
WorkQueues.dat WorkQue
information
Saves information of Queues information of
the WorkQue.
All files related to
project except
ProjectName.obj *1
Project Select EPSON RC+ 7.0 menu-[Setup]-
[System Configuration] to display the
[System Configuration] dialog.
When [Include project files when status
exported] check box is checked in
[Controller]-[Preferences], the project file is
stored.
Includes program files.
*1 Storage of “All files related to project except ProjectName.obj” can be specified by a
setting.

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4