Epson RC700 Series Original Instructions

Regular Inspection 2. Regular Inspection for RC700DU / RC700DU-A
206 RC700 Series Rev.3
2. Regular Inspection for RC700DU / RC700DU-A
This chapter describes maintenance inspection procedures. Performing maintenance
inspection properly is essential to prevent trouble and ensure safety.
Be sure to perform the maintenance inspections in accordance with the schedule.
2.1 Inspections and Schedules
Refer to Functions required for designing - 2. Part Names and Functions for the names and
position of each part.
Inspection Point
Frequency
Method
Check Item
Controller 12 months Turn ON/OFF motor and
Restart
Activates without any
error
Emergency Stop
Button
12 months
When the motor turned on,
activate the emergency
stop button
Turns off the motor
Safeguard 12 months
When the motor turned on,
turn on the safeguard
Turns off the motor
Fan (Front) 1 months Visual inspection and
cleaning
No stain
Fan (Rear) 1 months Checking the operating
sound
No noise
Battery 1 months Checking the operating
sound
No noise

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4