Epson RC700 Series Original Instructions

Functions 14. I/O Remote Settings
RC700 Series Rev.3 159
(*13) Following shows status number/error number of output (Error, SError, Warning, Alarm).
Name
Error Number
Error
1000 to 8000s
SError
9000s
Warning
400 to 999
Alarm
(No error codes)
For more information of status number/error number, refer to “Status Code / Error Code List” manual.
“Alarm” will on when battery alarm or grease alarm of Controller or Manipulator occurs with “Robot
maintenance” enabled. For details of Robot maintenance, refer to “Alarm” section of each Controller
maintenance manual.

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4