EasyManua.ls Logo

Epson RC700 Series - Page 99

Epson RC700 Series
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Functions 1. Specifications
RC700 Series Rev.3 81
Item
Specification
Maximum Rated Capacity
2.5 kVA (Depending on the Manipulator model)
Maximum Load Current
12.5A (Depending on the Manipulator model)
Short-circuit current rating
5 kA
Maximum Supply Source
Impedance
0.32 Ω
Insulation Resistance
100 M or more
Rated Ambient Temperature
Installation: 5 to 40 °C
Transportation or Storage: -20 to 60 °C
Rated Relative Humidity
Installation: 20 to 80 % (with no condensation)
Transportation or Storage: 10 to 90% (with no condensation)
Weight *1
11 kg
9 kg
Degree of protection
IP20
*1 Weight of the unit is indicated on the Drive Unit and Control Unit itself.
Make sure to check the weight before units transfer or relocation and prevent throwing out your
back at holding the unit.
Also, make sure to keep your hands, fingers, and feet safe from being caught or serious injury.
*2 When using the Force Sensor I/F board, a maximum of one board/two ports expansion is
available for RS-232C board.
Use this product under the condition of overvoltage category 2, degree of stain category 2.
NOTE

Table of Contents

Other manuals for Epson RC700 Series

Related product manuals